Instruction Manual

Dibond Butler Finish (Alu-Dibond):

1) Allow the panel and suspension plate to acclimate to room temperature (20°C).
2) Remove the protective film from the back of the panel.
3) Determine the location of the suspension plate in the middle at a distance of 1/4 from the top. Clean this area with the alcohol wipe and dry with kitchen paper.
4) Stick the suspension plate to the panel and press it firmly for 20 seconds.
5) Pressurize the suspension plate with a heavy object (15 kg) and let it rest for 1 hour.
6) Wait 24 hours before hanging the panel.